sink

Can kitchen sinks
Engineering interpreter for the design of the most metal kitchen tools

Anywhere you see a clean and organized kitchen, pay attention to the sink's design, material, and brand. Sinks, though might not seem at first, are the most key part of the kitchen. a high-quality design for this distinguishing equipment in the kitchen is of high importance, and Can company puts this product in the top four productions.
A good and high-quality sink in one look
It doesn't matter whether your kitchen is traditional with a top-mount sink, or has a more modern look with an under-mount one; Either way, the width of the sheet and the depth of the sink are two important factors, to be minded while making a purchase. The depth of a high-quality sink in the market, including Can sinks is 21 cm. Also, in terms of the sheet thickness, there are two kinds: 0.7 mm sink and 1 mm. Naturally, the 1 mm sinks are harder, more lasting, and higher priced than the 0.7 sinks. The standard measure for these sinks made with stainless steel sheets is 116.5 × 51 cm.
Top mount sinks don't need waterproofing during installation, and normally last more. On the other hand, the under-mount sinks, though looking more attractive, need careful waterproofing to avoid rot caused by water leakage.
Sink trays situated on the right or left, are designed based on the needs of the customer or the kitchen’s design. From here on, everything affecting choosing a sink depends on your taste, needs, and your particular use, rather than technical features and the design of the sink.
Design elegance
It is very important in the design of the sink that the water exits well. Relating this, the designer engineers of Can sinks created calculated and precise grooves, providing a quick and complete water exit. On the other hand, the corners are designed curve-shaped, so no water remains there, which is hard to clean.
Another matter is high accuracy in professional design, welding, and bending in Can sinks, which compared to competitors in the market, is much higher in quality. Exquisite equipment, such as particular fixtures are used in the production of Can sinks, causing higher accuracy and elegance.
High diversity, the choice among the most attractive
While under the current circumstances, foreign companies working in the field of sinks don’t have much activity in Iran's market, Can’s diverse products are answering the needs of different tastes, in terms of looks and material at the internal market.
At present, all Can sinks are manufactured with two trays. However, observing the differences between the models is joyful. For example, in model S 8161, we see two trays, one bigger than the other; so according to the customer’s need and taste, there are more options available.
Attractive, like handmade box sinks
The newest model of Can sinks is the handmade box sink, which is diverse, and many famous foreign sink producers also produce this model. The sheet thickness in this sink is 1 or 1.25 mm. The models 74 BCN, 90 BCN, and 104 BCN are examples of this model. The depth of the tray in the box sinks is 25 cm, and they can also be customized as OEM.
The box sinks are installed in three methods: top-mount, under-mount, and flash-mount.
Box sink models such as 83 BCN, 88 BCN, 4040 A, 4050 A, and 4060 A have a sheet width of 1mm. but having resistance and a middle wall, they can be as hard as a single-tray sink, however, single-tray box sinks such as 4040 A can be converted to double-tray sinks using accessories.
Practical accessories
One of the charms of choosing Can box sinks is the practical accessories presented with the elegant sinks. One of them is the aluminum watering can, used to place wet dishes, sharp tools, or hot dishes that are likely to damage the sink.
In other models of Can sinks, other accessories such as dishwashing liquid containers, wood meat boards, fruit washers, etc. are presented with the product based on the size of the sink. For example, a wood meat board is presented with the model 202 BCN.
The ensigned box sink
Among the box sinks, model 204 BCN consists of two big basins instead of trays, and is special in technical design and engineering. This product is one of the ensigned Can sinks, and no product similar to it is presented by internal competitors.
A perfect product!
The perfect product among the box sinks is model 304 BCN. it has the ability of “waterfall faucet” installation, in addition to accessories available for Can sinks. The waterfall faucet is designed to increase the speed and efficiency of watering, by spraying water on dishes, while using less water.
Solution for easier sink cleaning
in addition to the dishwashing liquid container presented with the box sink model 90 BCN, there is another little sink used for washing materials like vegetables, which we don’t want to touch the sink bottom. In addition to these, we can wash vegetables and fruit with detergents in this little sink. Another advantage is that some washings that require less space can be done in it, so the whole box sink doesn't get dirty, and there's no need to clean it.
Sink's Achilles heel
As we expect, sinks don't break, compared to the kitchen's electrical and gas equipment. The factor that is most damaging to sinks, is users' recklessness, by pouring particular materials on it, for example, acidic detergents or baking soda, causing damage to this lasting equipment of the kitchen. That is why Can company presents its nano sink cleaner solution to customers along with its sinks.
Quality is Can's key
Can claims to use the most high-quality material in the market for its sinks. However, this company tries to present products in a wide price range, based on different tastes in the market. However, quality assurance in the production of the Can brand is highly valuable to this company. The 60-month insurance for Can Sinks is proof of this company’s trust in the high quality of its products.

Our leading outlook in the sink market
The production of granite sinks is on the agenda of Can company designers, and soon it will be in the market, among the various Can sinks. Adding other attractive accessories such as a heating element in the sink tray to speed the drying of dishes is one of the designs you will see in the future products of Can company.
The key point in the design and production of Can products in the engineering department of the company is ideation. Because the minds of Can designers are different from the market. Engineers of Can company always try to come up with new ideas for new products, beyond the available products in the market, and to become leaders in presenting the most modern sink models, competing with international producers.
Therefore, this company is always present in the exhibitions of household appliances with new products and replaces its older models with new ones at a considerable speed.
Here, the designer engineers try to avoid limiting their ideas to copying foreign products. Their mentality is to focus on presenting bold innovations at a level to compete with international producers. This led to the ongoing exportation of Can sinks to countries such as Iraq, Pakistan, Turkey, Syria, Canada, etc. It is our honor to claim that in the international market, and competition with major Chinese producers, Can products offer a higher quality at the same price range.